Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Current »

The V2 Kinematic Assembly .STEP file can be downloaded below.

The hole pattern on the B-table is accurate within the model. Every other hole around the B-table is threaded to accept M4 screws. The holes that are not threaded are meant to be used for dowel pins. The outer two holes on the machines should not be used, those are used during the build process to level the B-table.

  File Modified
You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
No files shared here yet.
  • Drag and drop to upload or browse for files

    • No labels