Pocket NC V2 Demo Part-Spiral

Click below to download the tutorial on running the "Spiral" demonstration part on the Pocket NC. The G-code for the part is also available below.

You will not need the Fusion 360 Spiral Part v6.f3z to run the G-code but it is provided for reference. When you use a CAM file you did not produce always check the results are what you expect before running the machine.

Revision History:

First Release: June 2019 (QR)

 

 

  File Modified

File Spiral Part (4).ngc

May 05, 2020 by Kerry Neal

File Spiral Part v6.f3z

Apr 16, 2021 by Kerry Neal

PDF File V2 Demo Part-Spiral.pdf

Jun 01, 2021 by Q Rothing