...
You will not need the Fusion 360 Spiral Part v6.f3z to run the G-code but it is provided for reference. When you use a CAM file you did not produce always check the results are what you expect before running the machine.
Info |
---|
This tutorial uses the Kinetic Control user interface released on 11/1/2021; if you are using the old user interface, please refer to the original version of this tutorial posted under “Legacy Resources” |
Revision History:
First Release: June 2019 (QR)
Revised for Kinetic Control: Nov. 2021 (MR)attachments
View file |
---|
name | V2 Demo Part Instructions-Spiral (Kinetic Control).pdf |
---|
|