...
This tutorial guides users through the process of getting an updated BeagleBone Board for their V1 machine and using the newer software user interface
...
Turn on your machine.
Connect to your computer using the mini USB port.
Wait about 30 seconds 2 minutes for the machine to fully boot before attempting to connect to it.
Open your web browser (Chrome, Firefox or Safari) and type the Pocket NC’s IP address, “192.168.7.2” (192.168.6.2 for Mac computers) into the search bar.
...
The User Interface will open in the “Production” screen.
...
For more information on the software UI please see the V2 Software Overview.