...

On occasion, the Beaglebone board running the Pocket NC can end up in a state where it continually logs a single error over and over. This can cause the Beaglebone's disk to run out of space, making connection over USB not possibleimpossible. The steps below show how to clear out those logs and free up disk space again.

Step 1: Checking and Clearing

...

Space

Symptoms:

• Browser UI loads but does not connect

  • Indicator in lower left is red and says "Connecting..."

• No red light, blinking or solid, from the E-Stop button.

  • E-Stop button is the leftwards of the two silver buttons to the left of the USB slot.

...

To prevent this error from occuring again, occasionally check the Conf > Status tab to keep an eye on how much space G-code and log files are taking up. You can click the Clear Logs button at the bottom to delete your log files. If your logs seem to fill up space often, please contact us.

...

Step 2: Re-Installing the Tool Table 

In the case where the tool table on your "Tooling" page is missing after performing the above steps:

...